Waɗannan kebul na adaftar adaftar na musamman waɗanda aka tsara musamman don amfani tare da fakitin software na MultiECUScan, don bayar da ƙarin tsarin ɗaukar hoto (Jakar iska, ABS da Tsarin Gudanar da Wuta) akan abubuwan hawa inda ake buƙatar sadarwa ta hanyar maballin daban akan mahaɗin bincike.
Dubi lissafin Motoci masu goyan baya akan gidan yanar gizon MultiECUScan don cikakkun bayanan ɗaukar hoto.
Yin amfani da waɗannan igiyoyin adaftar yana cire buƙatar canza kebul na kebul na keɓancewa tare da haɗin da aka sayar wanda zai iya hana amfani da su tare da wasu motocin..
Abin da ke kunshe a cikin kunshin?
•’Green’ adaptor lead (MultiECUScan ‘Adapter 1′) – to allow ABS and Power Steering diagnostics.
This lead has a green connector on one end for easy identification.
– Pin 7 on the diagnostic tool end of the adaptor is electrically connected to pins 1, 7, 9 & 12 on the car end of the adaptor.
•’Red’ adaptor lead (MultiECUScan ‘Adapter 2′) to allow Airbag diagnostics.
This lead has a red connector on one end for easy identification.
– Pin 7 on the diagnostic tool end of the adaptor is electrically connected to pin 3 only on the car end of the adaptor.
•’Yellow’ adaptor lead (MultiECUScan ‘Adapter 3′) – to allow low speed CAN diagnostics (Fiat 500 da dai sauransu).
This lead has a yellow connector on one end for easy identification.
– Pin 6 on the diagnostic tool end of the adaptor is electrically connected to pin 1 on the car end of the adaptor.
– Pin 14 on the diagnostic tool end of the adaptor is electrically connected to pin 9 on the car end of the adaptor.
– Pin 7 on the diagnostic tool end of the adaptor is electrically connected to pin 12 on the car end of the adaptor.
** This cable meets the updated MultiECUScan specification for adaptor 3, with the pin 12 connection required for Xenon headlight coverage on CAN cars **
•’Purple’ adaptor lead (MultiECUScan 'Adaftar 4') don ba da damar bincikar murfin murfin lantarki.
Wannan jagorar tana da haɗe-haɗe da shuɗi a gefe ɗaya don sauƙin ganewa.
– Pin 7 on the diagnostic tool end of the adaptor is electrically connected to pins 7, 8, 11 & 13 on the car end of the adaptor.
• Please note this bundle does NOT include any diagnostic interface cables – this is just the break-out adaptors.
Idan kuna buƙatar hanyoyin haɗin ELM327 da KKL kuma, suna samuwa tare da waɗannan igiyoyin adaftar a cikin tarin kayan aiki kawai a nan, ko cikakken kunshin lasisi a nan.
Me nake bukata don amfani da waɗannan adaftan?
– MultiECUScan software (sigar kyauta ko lasisi)
– ELM327 v1.3 (ko mafi girma) da/ko KKL (VAG-COM) na USB
– A laptop or PC running Windows XP, Vista, 7 ko 8 tare da tashar USB
– Microsoft .NET Framework Version 2.0 SP1 (v3.5 da ake buƙata don Windows 8). Kyauta don saukewa daga www.microsoft.com idan ba a riga an shigar dashi akan kwamfutarka ba
– 1.5GHz CPU or higher
MUHIMMAN NOTE: These adaptor cables are only intended for use with the MultiECUScan software, on supported Fiat group vehicles, as listed on the MultiECUScan.net Supported Vehicles List.
Use on other vehicles or with other software is not supported and may cause damage to your vehicle or equipment.
Saduwa da mu:
Teleho:+86 755 25608673
address:Floor 8,huguang building,Longgang Road, Shenzhen China