He mau uwea adapter break-out kūikawā kēia i hoʻolālā ʻia no ka hoʻohana ʻana me ka pūʻolo polokalamu MultiECUScan, e hāʻawi i ka uhi pūnaewele hou (ʻeke ʻea, ʻO ABS a me nā ʻōnaehana Power Steering) ma nā kaʻa kahi e pono ai ke kamaʻilio ma o nā pine like ʻole ma ka mea hoʻohui diagnostic.
E ʻike i ka papa inoa o nā kaʻa i kākoʻo ʻia ma ka pūnaewele MultiECUScan no nā kikoʻī kikoʻī.
ʻO ka hoʻohana ʻana i kēia mau uwea adapter e hoʻoneʻe i ka pono e hoʻololi i kāu mau kaula hoʻopili ponoʻī me nā pilina soldered i hiki ke pale iā lākou mai ka hoʻohana ʻana me nā kaʻa ʻē aʻe..
ʻO ka mea i komo i loko o ka pūʻolo?
•’Green’ adaptor lead (MultiECUScan ‘Adapter 1′) – to allow ABS and Power Steering diagnostics.
He mea hoʻohui ʻōmaʻomaʻo kēia kepau ma kekahi ʻaoʻao no ka ʻike maʻalahi.
– Pin 7 ma ka mea hana diagnostic hope o ka mea hoʻopili i hoʻopili ʻia me nā pine 1, 7, 9 & 12 ma ka hope kaʻa o ka mea hoʻopili.
•’Red’ adaptor lead (MultiECUScan ‘Adapter 2′) e ʻae iā Airbag diagnostics.
He mea hoʻohui ʻulaʻula kēia kepau ma kekahi ʻaoʻao no ka ʻike maʻalahi.
– Pin 7 ma ka mea hana diagnostic e hoʻopili ʻia ai ka hope o ka mea hoʻopili i ka pine 3 ma ka hope o ke kaʻa wale nō.
•’Yellow’ adaptor lead (MultiECUScan ‘Adapter 3′) – to allow low speed CAN diagnostics (Fiat 500 a pela aku).
He mea hoʻohui melemele kēia kepau ma kekahi ʻaoʻao no ka ʻike maʻalahi.
– Pin 6 ma ka mea hana diagnostic e hoʻopili ʻia ai ka hope o ka mea hoʻopili i ka pine 1 ma ka hope kaʻa o ka mea hoʻopili.
– Pin 14 ma ka mea hana diagnostic e hoʻopili ʻia ai ka hope o ka mea hoʻopili i ka pine 9 ma ka hope kaʻa o ka mea hoʻopili.
– Pin 7 ma ka mea hana diagnostic e hoʻopili ʻia ai ka hope o ka mea hoʻopili i ka pine 12 ma ka hope kaʻa o ka mea hoʻopili.
** Hoʻopili kēia kelepona i ka kikoʻī MultiECUScan hou no ka adapter 3, me ka pine 12 pono ka pilina no ka uhi kukui Xenon ma nā kaʻa CAN **
•’Purple’ adaptor lead (MultiECUScan ‘Adapter 4’) to allow electric hood diagnostics.
This lead has a purple connector on one end for easy identification.
– Pin 7 ma ka mea hana diagnostic hope o ka mea hoʻopili i hoʻopili ʻia me nā pine 7, 8, 11 & 13 ma ka hope kaʻa o ka mea hoʻopili.
• Please note this bundle does NOT include any diagnostic interface cables – this is just the break-out adaptors.
If you require the ELM327 and KKL interfaces too, they are available with these adaptor cables in a hardware-only bundle here, or a full licensed bundle here.
What do I need to use these adaptors?
– MultiECUScan software (free or licensed version)
– ELM327 v1.3 (or higher) and/or KKL (VAG-COM) uwea
– A laptop or PC running Windows XP, Vista, 7 ole 8 with a USB port
– Microsoft .NET Framework Version 2.0 SP1 (v3.5 required for Windows 8). Free to download from www.microsoft.com if not already installed on your computer
– 1.5GHz CPU or higher
IMPORTANT NOTE: Hoʻohana wale ʻia kēia mau uwea adapter me ka polokalamu MultiECUScan, ma nā kaʻa hui Fiat i kākoʻo ʻia, e like me ka mea i helu ʻia ma ka MultiECUScan.net Kākoʻo ʻia nā kaʻa papa inoa.
ʻAʻole kākoʻo ʻia ka hoʻohana ʻana ma nā kaʻa ʻē aʻe a i ʻole me nā polokalamu ʻē aʻe a hiki ke hōʻeha i kāu kaʻa a i ʻole nā mea hana.
Kāhea iā mā˚ou:
Telephone:+86 755 25608673
Wāʻōlelo:Floor 8,huguang building,Longgang Road, Shenzhen China