atụmatụ:
* Gụọ koodu nchọpụta nsogbu,ma ọnụọgụ abụọ na onye nrụpụta-akọwapụtara,ma gosipụta ihe ha pụtara (ngafe 3000 nkọwapụta ọnụọgụ koodu na nchekwa data).
* Kọwaa Koodu nsogbu ma gbanyụọ MIL (“Check Engine” light).
* Gosiputa data ihe mmetụta ugbu a,gụnyere:
* Injin RPM
* Ego Ibu Ibu
* Okpomoku Kporo nku
* Ọnọdụ sistemụ mmanụ
* Speedgba Ọgbọ
* Mkpụmkpụ Mpempe Ube dị mkpụmkpụ
* Ogologo Ogologo Fuel Grim
* Nrụgide Manifold
* Ọga Oge
* Na-enweta Ọkụ Ahịa
* Igwe Ọdụdọ ikuku
* Zuru Oke Ọnọdụ
* Oxygen ihe mmetụta voltaji / metụtara obere mkpụbelata mmanụ mkpo
* Ọnọdụ mmanụ sistem
* Nrụgide Mmanụ
Note:Ọ bụ dakọtara na Nissan ugbo ala.
nkọwa:
1.ISO9141-2(5 baud init,10.4Kbaud)
2.ISO14230-4 KWP(5 baud init,10.4Kbaud)
3.ISO14230-4 KWP(ngwa ngwa init,10.4Kbaud)
4.ISO15765-4CAN(11bit ID,500 Kbaud)
5.ISO15765-4CAN(29bit ID,500 Kbaud)
6.ISO15765-4CAN(11bit ID,250 Kbaud)
7.ISO15765-4CAN(29bit ID,250 Kbaud)
* Nha Nke:8.2 * 4.6 * 2.5cm
* Oke ngwugwu:12 * 16.3 * 2.5cm
* Ihe Ibu:58g
* Ibu ibu:68g
Kpọtụrụ anyị:
Ekwentị:+86 755 25608673
Address:Floor 8,huguang building,Longgang Road, Shenzhen China