Njirimara:
1.Kwadoro site na Rump Preser na 12V outlet na II nchekwa II.
2.Njikọ mmekọrịta n'etiti 5V DC Ike na ụgbọ mmiri Obd II.
3.Na-echekwa koodu ugbo ala na presets.
4.Using this simple memory saving device when replacing your car battery will help you avoid these problems.
5.Ngwaọrụ a nwere ike ịrụ ọrụ na 12V DC, Gụnyere ROM Starter, DC 12V Lead-acid battery, or another car’s DC 12V power outlet.
Tịm fiọk:
The 12V DC plug of memory should be correctly connected 12V power source, if not, the red led light on the plug will not light up.
If the power source from another car, please check whether the car’s Cigarette Lighter on good condition or not.
If the power source from a jump starter, then verify if the cause is from the contact.
If the power source is from an alternative 12V Lead-acid battery, then check whether the polarity correct or not.
Kpọtụrụ anyị:
Ekwentị:+86 755 25608673
Address:Floor 8,huguang building,Longgang Road, Shenzhen China