1.TTL-232R Converter Cable provides a USB to TTL Serial interface with various end connectors.
2.On board FT232RL/FT232RQ provides single chip USB to asynchronous serial data transfer interface.
3.Entire USB protocol handled by the electronics in the cable USB.
4.Connect directly to a microcontroller UART or I/O pins.
5.5V CMOS drive outputs and 5V safe TTL inputs makes the TTL-232R easy to interface to 5V MCU‟s.
6.+5V or +3.3V output allows external logic to be powered from the USB port.
7.6 way outputs provide Tx, Rx, RTS#, CTS#, VCC and GND (except Audio Jack which provides only TX,RX and GND).
8.3 way Audio Jack connector provides Tx, Rx and GND.
9.Low USB bandwidth consumption.
10.UHCI / OHCI / EHCI host controller compatible.
11.USB 2.0 Full Speed compatible.
12.-40°C to +85°C operating temperature range.
13.Cable length is 1.80m (6 feet).
Whakapā mai:
Telephone:+86 755 25608673
Address:Floor 8,huguang building,Longgang Road, Shenzhen China