Ciri-ciri:
1.Dikuasakan oleh mana-mana pemula lompat dengan outlet 12V ke dalam PENJIMAT Memori OBD II.
2.Penyambung antara muka antara sumber kuasa DC 12V dan port OBD II kenderaan.
3.Mengekalkan kod kenderaan dan pratetap elektronik.
4.Using this simple memory saving device when replacing your car battery will help you avoid these problems.
5.Peranti ini boleh berfungsi dengan mana-mana sumber kuasa 12V DC, termasuk melompat starter, DC 12V Lead-acid battery, or another car’s DC 12V power outlet.
Notis:
The 12V DC plug of memory should be correctly connected 12V power source, if not, the red led light on the plug will not light up.
If the power source from another car, please check whether the car’s Cigarette Lighter on good condition or not.
If the power source from a jump starter, then verify if the cause is from the contact.
If the power source is from an alternative 12V Lead-acid battery, then check whether the polarity correct or not.
Hubungi kami:
Telefon:+86 755 25608673
Alamat:Floor 8,huguang building,Jalan Longgang, Shenzhen China