Site icon Loja de fábrica de cabo de Hengye

WIFI ELM327 Auto Scanner sem fio OBD2 OBDII adaptador ELM 327 Interface OBD2 / Auto varredor do diagnóstico do carro do OBD II

Email us

Wifi ELM327 interface is able to detect and interpret obd2 / eobd protocols automatically. It also provides support for high speed communications and a low power sleep mode. It use AT commands to communicate with a host device (PC,caderno,Iphone,iPod touch,iPad and so on). There are plenty of software packages available,which are fully compatible with this tool. Some of them have pretty useful features,such as engine running parameters monitoring,DTC reading and clearing,MPG meter,etc. You can even write your own software on a specified hardware platform if you wish,because the AT commands are fully documented and very well explained. This tool is only 2.7 x 1.25x 0.9 inches,and it comes with a 6 ft OBDII cable for easy installation. It also includes a power switch built-in to prevent the need for having to constantly disconnect your unit from the OBDII port. It is compatible with 1996 and later vehicles which are obd2 or eobd compliant. Connecting to your iPhone / iPod touch is made by WIFI connection in adHoc mode.

With proper software installed in the host device,you may have following parameters read out from your vehicle:

Velocidade do veículo
RPM
Fuel Consumption*
Engine Coolant Temp
Pressão do combustível
Calculated Engine Load
Throttle Position
Pressão do coletor de admissão
Air Intake Temp
Adiantamento de Tempo
Mass Air Flow
Fuel Level
Barometric Pressure
EVAP System Vapor Pressure
Fuel Trim
Nota:
Your vehicle may not support all above parameters.How many parameters you can get is depended on the vehicle manufacturer’s implementation.

Multi-Protocol Support:

SAE J1850 PWM (41.6 Kbaud)
SAE J1850 VPW (10.4 Kbaud)
ISO 9141-2 (5 baud init,10.4 Kbaud)
ISO 14230-4 KWP (5 baud init,10.4 Kbaud)
ISO 14230-4 KWP (init rápido,10.4 Kbaud)
ISO 15765-4 Cna (11 ID bit,500 Kbaud)
ISO 15765-4 Cna (29 ID bit,500 Kbaud)
ISO 15765-4 Cna (11 ID bit,250 Kbaud)
ISO 15765-4 Cna (29 ID bit,250 Kbaud)
SAE J1939

Vehicle Coverage:

Work with all models that support the OBD2 standard ( Acura,Alfa Romeo,Ariel Atom,Aston Martin,Audi,Bentley,BMW,Buick,Cadillac,Chevrolet,Chrysler,Citroen,Daewoo,Daihatsu,Daimler,Dodge,Ferrari,Fiat,Ford,Geo,GMC Holden,Honda,Hummer,Hyundai,Infiniti,Isuzu,Jaguar,Jipe,Kia,Lamborghini,Lancia Land Rover,Lexus,Lincoln,Lotus,Maserati,Mazda,McLaren,Mercedes,Mercúrio,MG,Mini Mitsubishi,Nissan,Oldsmobile,Opel,Pagani,Panoz,Peugeot,Plymouth,Pontiac,Porsche Regal,Renault,Rolls Royce,Roush,Rover,Saab,Saleen,Saturn,Assento,Scion,Shelby Skoda,Smart,Subaru,Suzuki,Tesla,Toyota,Triumph,TVR,Vauxhall,Volkswagen,Volvo,Yugo etc…).
Para sua informação:
For your vehicle to be OBD II compliant it must have a 16-pin DLC (Conector de link de dados) sob o painel e a etiqueta de informação relativa ao controlo das emissões do veículo deve indicar que o veículo está em conformidade com o OBD II.
All vehicles from 1996 in USA and Petrol cars from 2001,diesel cars from 2003/2004 in Europe are obd2 compliant.

Hardware requirements:

PC/iPhone/iPod/iPod Touch/iPad
Important:Your PC requires wireless LAN router supporting WiFi 802.11 a/b/g for linking.

Software Requirements:

– All ELM327 based software
– iOS base software in Apple store:Rev / FUZZYCar / DashCmd / SpeedPORT / Nova Scan
Attention:iOS base software are not included you must buy from Apple App Store! we only offer PC version software & Instructions manual (on the CD)

Technical Specifications:

SSID:WiFiOBD
IP:192.168.0.10
Subnet:255.255.255.0
Porto:35000
Range:50 ft (Line of sight)
Antenna:Internal
Power Consumption:0.75 Watts

Wifi Standard:802.11a/b/g
Operating Temperature:-15 Para 100 Deg Celsius

Package contents

1 x Wifi ELM327 obd interface
1 x Software CD

Contate-nos:

Mail to ChinaTopCable

Telephone:+86 755 25608673

Endereço:Floor 8,huguang building,Estrada de Longgang, Shenzhen China