mamiriro:
1.Inofambiswa nechero yekusvetuka inotangisa ine 12V yekubuda muOBD II Memory Saver.
2.Interface yekubatanidza pakati pe12V DC magetsi sosi uye mota OBD II chiteshi.
3.Inochengetedza macode emota uye zvemagetsi preset.
4.Using this simple memory saving device when replacing your car battery will help you avoid these problems.
5.Ichi chishandiso chinogona kushanda nechero 12V DC magetsi sosi, kusanganisira jump starter, DC 12V Lead-acid battery, or another car’s DC 12V power outlet.
Notice:
The 12V DC plug of memory should be correctly connected 12V power source, if not, the red led light on the plug will not light up.
If the power source from another car, please check whether the car’s Cigarette Lighter on good condition or not.
If the power source from a jump starter, then verify if the cause is from the contact.
If the power source is from an alternative 12V Lead-acid battery, then check whether the polarity correct or not.
Taura nesu:
Telephone:+86 755 25608673
Address:Floor 8,huguang building,Longgang Road, Shenzhen China