1.TTL-232R-RPi Debug cable provides a USB to TTL Serial interface for Raspberry Pi computer.
2.On board FT232RQ provides single chip USB to asynchronous serial data transfer interface.
3.Entire USB protocol handled by the electronics in the cable USB.
4.Connect directly to a microcontroller UART or I/O pins.
5.UART interface support for 7 atawa 8 data bits, 1 atawa 2 stop bits and odd / even / mark / space / no parity.
6.Fully assisted or X-On / X-Off software handshaking.
7.Data transfer rates from 300 baud to 3 Mbaud at TTL levels.
8.Internal EEPROM with user writeable area.
9.5V safe TTL inputs make the TTL-232R easy to interface to 5V MCU’s.
10.FTDI’s royalty-free VCP allow for communication as a standard emulated COM port and D2XX ‘direct’ drivers provide DLL application programming interface.
11.Support for FT232R FTDIChip-ID™ feature for improved security.
12.3x ‘flying leads’ outputs provide TXD, RXD and GND signals.
13.UHCI / OHCI / EHCI host controller compatible.
14.USB 2.0 Full Speed compatible.
Taros Kami:
Telepon:+86 755 25608673
Address:Floor 8,huguang building,Longgang Jalan, Shenzhen China