Tính năng:
1.Powered by any jump starter with a 12V outlet into an OBD II Memory Saver.
2.Interface connector between a 12V DC power source and vehicle’s OBD II port.
3.Preserves vehicle codes and electronic presets.
4.Using this simple memory saving device when replacing your car battery will help you avoid these problems.
5.This device can work with any 12V DC power source, including jump starter, DC 12V Lead-acid battery, or another car’s DC 12V power outlet.
Thông báo:
The 12V DC plug of memory should be correctly connected 12V power source, if not, the red led light on the plug will not light up.
If the power source from another car, please check whether the car’s Cigarette Lighter on good condition or not.
If the power source from a jump starter, then verify if the cause is from the contact.
If the power source is from an alternative 12V Lead-acid battery, then check whether the polarity correct or not.
Liên hệ với chúng tôi:
Telephone:+86 755 25608673
Địa chỉ:Floor 8,huguang building,Thành phố Longgang Road, Shenzhen China