OBD2 Male 16-Pin Wiring Plug Adapter, Black Shell
$7.00 / pc · MOQ 500 pcs
The black-shell male J1962 plug for DIY diagnostic leads: spring-steel pins across hundreds of mating cycles, OEM moulds that hold steady, full 16-pin wiring access.
- Description
The black male wiring plug is the standard-look connector half of a DIY diagnostic lead: a 16-pin OBD II male J1962 shell with wiring terminals inside, finished in the black that matches most factory cable builds. For repairs of a broken plug or new lead builds where the shell should not draw attention, this is the one.
The pin and mould spec carries the value: high-quality spring steel pins that make contact with the inserted device for hundreds of mating cycles, in OEM moulds that insure stable sockets which connect every time and do not wobble. Working temperature -30 to 84°C; RoHS-compliant materials; pins meeting all vehicle communication standards.
Key features
- OBD II male 16-pin J1962 wiring plug
- Black shell, factory-standard look
- Spring-steel pins, hundreds of mating cycles
- High-quality OEM moulds, stable non-wobble fit
- Working temperature -30 to 84°C
- RoHS-compliant materials
Specifications
| Type | OBD II male wiring plug adapter |
| Shell colour | Black |
| Pins | 16, spring steel, all vehicle communication standards |
| Working temperature | -30 to 84°C |
| Materials | RoHS compliant |
An honest scope note: this is the plug, not a finished cable — terminations and pin mapping are the builder’s job; the cavities are numbered per the J1962 standard.
Typical applications
- DIY OBD2 lead building and plug repair
- Custom harness terminations
- Replacement plugs for worn cables
- Bench and workshop stock
Custom and OEM options
Quantity and packing run per order; samples ship in 3–7 days.
FAQ
Same plug as the blue version?
Same 16-pin male J1962 spec, different shell colour — black for factory-standard look, blue for bench sorting.
Can it replace a moulded plug on an existing cable?
Yes — that is the wiring-plug use case; cut, strip, terminate per the numbered cavities.
Related OBD2 Products
- OBD-II J1962 Female Replacement Connector, 16 Sockets, VW/GM Fit
- OBD2 Male 16-Pin Wiring Plug Adapter, Blue Shell
- OBD-II Female J1962 Replacement Connector with 16 Wire Sockets
- OBD2 Female 16-Pin to Open End Cable, 2 m Round
- OBD-II J1962 Female Replacement Connector with 16 Sockets, 10 Pack
- OBD2 16-Pin Male to Open Wire Cable, 3 m
- Standard OBD2 Female 16-Pin Wiring Socket Adapter
- KTM 6-Pin to OBD2 16-Pin Adapter Cable for Motorcycle Diagnostics
Request a Quote
Tell us the spec and quantity — we reply with price, MOQ and lead time within 24 hours.
Samples, packing options, payment terms and warranty conditions are set out in How to Order and Delivery Information.
