8-Pin SATA 3.0 Cable for SSD, 10 cm

A short SATA data cable for connecting a 2.5-inch solid-state drive inside a compact chassis. At 10 cm it is the length that suits a small case, a laptop bay or a bench setup where a standard 50 cm cable is simply too much slack to manage.

It is a SATA 3.0 part, so it works at the SATA III interface rate of up to 6 Gbps — the link that makes a modern SSD feel fast rather than merely adequate — and it is backward compatible with SATA II and SATA I drives.

Key features

• Short 10 cm SATA data cable for tight builds
• SATA 3.0 (SATA III), up to 6 Gbps link rate
• Backward compatible with SATA II and SATA I
• Suited to 2.5-inch SSDs and hard disks
• Compact, flexible, easy to route

Specifications

One point to confirm, because it decides whether this cable fits. The factory lists the drive-side header as 8-pin; standard SATA data is a 7-pin connector, so an 8-pin header typically belongs to a specific chassis or a built-in drive harness. Tell us the socket on your device and we will confirm the correct build.

Typical applications

• Replacing a short internal SSD cable in a small case
• Bench and build setups with an exposed drive
• Reusing a spare 2.5-inch SSD in a compact machine

Custom and OEM options

Connector plating, cable length and gauge, ferrite cores, jacket colour, printed logo and retail packaging with your own artwork can all be specified. Standard items from 100 pcs, custom builds from 500 pcs, free samples, production in 20–25 working days.

FAQ

Is it 6 Gbps or 3 Gbps?
It is a SATA 3.0 cable, so it runs up to 6 Gbps with a SATA III drive; the actual rate follows the slowest device on the link.

Will it fit a 3.5-inch drive?
The connector is for 2.5-inch drives and compact bays; tell us your socket and we will confirm.

Samples, packing options, payment terms and warranty conditions are set out in How to Order and Delivery Information.